 |
|

 |
  |
 |
 |



 |
Fretted Instrument Repair Prices
All prices are listed in Canadian Dollars
Minimum bench charge: $25
Rush fee: $25 below $100 - 25% above $100
Estimate: $25 (Charged only of work is refused)
Set up (acoustic): $50 to $100, $100 all 12-strings.
Set up (electric): $50 to $100, Floyd Rose or Kahler - $125
Nut Work
Install new bone nut: $100
12 sting guitar: $150
Install new plastic nut: $30 + plastic nut
Saddles
Non-compensated: $50
With compensation: $75
Install plastic saddle: $30
Fret Work - set up not included, new nut and/or saddle often required
Dress (level) and crown all frets: All instruments $200 + set up
Partial refret: $200 and up
Complete refret
With or without binding: $400 + set up
Gibson style binding: $625 + set up
Bar-frets: $700 + set up
Electric bass (5 or 6 string): $500 to $600 + set up
Electronics - Restring not inlcuded
Troubleshoot electronics: $25 and up, based on $75/hour rate
Replace pots or switch, out put jack: $25 to $60, depending on
restring + parts
Install under-saddle acoustic p.u.: $75 + restring
Install other acoustic pick up: $75 and up + restring
Complete re-wire: $75/hour + restring
Woodwork - estimate required
Cracks, splices, brace re-glue, patchwork, broken headstocks:
$75/hour + refinish + restring, estimate required
Bridge remove and re-glue: $150 + set up
Replace bridge with pre-fabricated bridge: $175 + part + set up
New acoustic replacement bridge, shaped and installed: $250 +
saddle + set up
Fill and recut saddle slot, fit new bone saddle: $150 to $200 + restring
Replace bridgeplate: $150 to $300 + restring
Reset dovetailed neck: $500 + fretwork + set up + new saddle
Reset dovetailed neck, with wedge under fingerboard extension: $600 +
fretwork + set up + new saddle
Pickguards
Martin PG Replacement: $125 (tortoise-shell $25 extra)
Factory-made replacement, installed: $25 and up
Custom pickguard: $75 and up + material
Miscellaneous
Install tuning machines: $25 and up + parts
Finish repairs: Estimate required. $75/hour
All Labour rates are based on a $75/hour bench fee. Parts are not included in prices.
|
|
 |
 |
 |
|
|
 |